Auctioneers & Appraisers (800) 775-2289, (412) 765-1170, Fax (412) 765-0910 1725 Boulevard of the Allies, Pittsburgh, PA 15219 USA

 

SEARCH THE LIST: Specific items or names can be located by pressing Ctrl + F

Item	Qty.	Description
1.	1	Power Team Porta Power, Model P159D with Reservoir and Jack
2.	1	Boston Gear Radiotrol DC Motor Frequency Drive, Model VE Plus
3.	1	Aro Air Operated Diaphragm Pump
4.	1	SDS Dynamic Wheel Balancer System, Model 2500
5.	3	Federal Thickness Calibrators, Model 300P-2, 1" to 2"
6.	6	Nylon Lifting Straps
7.	1	Jay-Dee Compound Tapping Head
8.	1	New Face Mill and Tool Holder
9.	1	Cable Reel
10.	1	Roper Hydraulic Pump with Lincoln 1/2 hp Motor
11.	1	Hydraulic Pump
12.	1	Vickers Self-Contained Hydraulic Pump, Model 857507 with Baldor 3 hp Motor and Reservoir
13.	2	Jack Stands
14.	1	Leeds & Northrop Optical Pryometer
15.	1	Lectrotech Power Unit, Model V10A
16.	1	Hallden Knife Gauge Block
17.	1	Assorted Wilson Dial Gauges, Temperature Probe and Ball Bearing Cutter Assemblies
18.	1	Pratt & Whitney Precision Gauge Block Set
19.	1	Starrett Height Gauges
20.	1	Fowler 6" to 10" Bore Gauge
21.	1	Starrett Mitutoyo Inside Micrometers
22.	1	Starrett Precision Depth Gauge
23.	1	Starrett Precision Depth Gauge
24.	1	Starrett Vernir 18" Height Gauge
25.	1	Fowler 10" to 16" Bore Gauge
26.	1	Mikemaster Step Blocks, S/N 1579
27.	1	Ames Hardness Tester
28.	1	Ames Hardness Tester, 150 KGS Max.
29.	1	Wilson Hardness Tester
30.	1	Wilson Hardness Tester
31.	1	Wilson Hardness Tester
32.	1	Hardness Tester, Gauges and Inserts
33.	1	Precision Glide Machinist Set-Up Fixture
34.	1	O.S. Walker Model BM-55 Lifting Magnet
35.	1	O.S. Walker Model BM-55 Lifting Magnet, 5,500 lb. Capacity
36.	1	O.S. Walker Model BM-55 Lifting Magnet, 5,500 lb. Capacity
37.	1	O.S. Walker Model BM-30 Lifting Magnet, 3,000 lb. Capacity
38.	1	CM-3 Toter 3,000 lb. Lifting Magnet
39.	1	CM-3 Toter 3,000 lb. Lifting Magnet
40.	1	CM-3 Toter 3,000 lb. Lifting Magnet
41.	1	Bucks-CM-1-Toter 1,000 lb. Capacity Lifting Magnet
42.	2	O.S. Walker NEO-1000 Lifting Magnets, S/N 49165, 2,200 lb. Capacity
43.	1	Eron 8" Vise, Model TP-8
44.	1	Eron 8" Vise, Model TP-8
45.	1	Eron 8" Vise
46.	1	Eron 8" Vise
47.	1	Bison 7-1/2" Vise
48.	1	6" Machinist Vise
49.	2	Kurt 6" Vises
50.	2	Kurt 6" Vises
51.	2	Kurt 6" Vises
52.	2	Chick Magnetic Chucks
53.	1	. . . .
54.	2	Work Holding Systems, Model QL1550 - 19-1/2" x 6"
55.	2	Work Holding Systems, Model QL1550 - 19-1/2" x 6"
56.	2	Work Holding Systems, Model QL1550 - 19-1/2" x 6"
57.	2	Work Holding Systems, Model QL1550 - 19-1/2" x 6"
58.	2	Work Holding Systems, Model QL1550 - 19-1/2" x 6"
59.	2	Bock Twin Vises
60.	2	Bock Twin Vises
61.	2	Bock Twin Vises
62.	2	Bock Twin Vises
63.	2	Bock Twin Vises
64.	1	. . . .
65.	2	Roller Infeed/Outfeed Tables on Casters, 120" x 20" and 173" x 44"
66.	2	Approximately 20 ft. 1-Ton Swinging Jib Beams
67.	1	. . . .
68.	1	Hydraulic Set-Up Fixtures
69.	1	Hydraulic Set-Up Fixtures
70.	1	CM Loadstar 3-Ton Electric Hoist
71.	1	Budgit 1-Ton Electric Chain Hoist
72.	1	CM Loadstar 1/4-Ton Electric Chain Hoist
73.	1	CM Loadstar 1-Ton Electric Chain Hoist
74.	1	. . . .
75.	2	2-Ton and 1/2-Ton Swinging Jib Beams - Approximately 20 ft. and 18 ft. Long
76.	1	Mazak CNC Machining Center, Model AJV-35/80, S/N 74306 with 35 hp Motor, 78" Long x 31" Wide x 20" Lift, (30) Tool Station, High Pressure Cooling and Mazatrol M-32 Controller (***Machine #224***)
77.	1	Kurt 6" Machinist Vise
78.	1	Kitimura CNC Pallet Machining Center, Model MYCTR-6, S/N 60234 with 20 hp Motor, (30) Tool Station and (2) 48" Long x 24" Wide x 24" Lift Beds (***Machine #225***)
79.	1	Mazak CNC Machining Center, Model Power Center V-20D, S/N 52996 with 20 hp Motor, 80" Long x 32" Wide Work Area, (40) Tool Station and Fanuc Controls, Type A02B- 0051 - 8201 (***Machine #227***)
80.	1	Hillyer Dual Spindle CNC Machining Center, Model 21466, S/N M612 with 25 hp Motor, 62" x 146" Work Area, (30) Tool Station and GE Fanuc Upgraded Controls - 1999 Complete Rebuild (***Machine #128***)
81.	19	Sandvik Spindle Through Coolant Injection Tool Holders
82.	8	Carbide Insert Milling Tools with Holders
83.	1	. . . .
84.	1	. . . .
85.	1	. . . .
86.	1	. . . .
87.	1	. . . .
88.	1	. . . .
89.	1	. . . .
90.	1	P & H 1-Ton Electric Chain Hoist with Approximately 20 ft. Swinging Jib Rail
91.	1	P & H 1-Ton Electric Chain Hoist with Approximately 20 ft. Swinging Jib Rail
92.	1	Cincinnati Gilbert Horizontal Boring Machine, S/N 1002 with 15 hp Motor, 96" Long x 36" Wide x 72" Lift (***Machine #226***)
93.	1	Niles Bement Vertical Boring Mill, S/N 15369 with 15 hp Motor, 68" Table, 72" Max. Diameter, 15" Max. Spindle Wheel and 20 hp Auxiliary Spindle Machine (***Machine #407***)
94.	1	. . . .
95.	1	. . . .
96.	1	Mas Radial Drill Press, Model VR64, S/N 1154 with 5 ft. Arm and 24" Diameter Column (***Machine #111***) ************************* AUCTION SALE MOVES TO TOOL GRINDING AREA *************************
97.	1	Cincinnati Tool Grinder, S/N 1D2T6C-80
98.	1	Grand Rapids Tool Turning and Grinding Machine, Model DWA, S/N 8272
99.	1	Hammond Double End Tool Grinder, Model WD-10-C, S/N 12581
100.	1	Double End Pedestal Grinder
101.	1	Hammond Double End Tool Grinder
102.	1	. . . .
103.	1	48" x 12" Magnetic Chuck
104.	1	62" x 12" Magnetic Chuck
105.	1	48" x 12" Magnetic Chuck
106.	1	48" x 12" Magnetic Chuck
107.	1	60" x 12" Magnetic Chuck
108.	1	46" x 24" Magnetic Chuck
109.	1	60" x 24" Magnetic Chuck
110.	1	48" x 12" Magnetic Chuck
111.	1	36" x 11" Magnetic Chuck
112.	1	36" x 13" Magnetic Chuck
113.	1	31" x 8" Magnetic Chuck
114.	1	48" x 12" Magnetic Chuck
115.	1	48" x 12" Magnetic Chuck
116.	4	24" x 8" Magnetic Chucks
117.	1	48" x 12" Magnetic Chuck
118.	1	48" x 12" Magnetic Chuck
119.	1	48" x 9" Magnetic Chuck
120.	1	28" x 14" Magnetic Chuck
121.	1	Hertner Auto Battery Charger, Model 3SF12-600
122.	1	4-Jaw Chuck
123.	1	Angle Plate and Backing Plates
124.	1	Chuck
125.	1	. . . .
126.	1	. . . .
127.	1	. . . .
128.	1	. . . .
129.	1	. . . .
130.	1	Hannefin Hydraulics 75-Ton Straightening Press, Model T-17610, S/N T-17610 with 48" Throat
131.	1	Hydraulic Scissor Infeed Roller Table, 72" Long x 30" Wide
132.	1	Bridgeport Edge Grinder, Model 75-210, S/N H91 with 40 hp Motor, 18" Wide x 192" Long Magnetic Chuck and Digit MK5 Feed System with Energy Grind Capabilities
133.	1	18" Swing Jib Beam
134.	1	. . . .
135.	1	Hill Vertical Spindle Reciprocating Table, S/N 273 with 40 hp Motor, 10" Wide x 252" Long x 18" Working Height, Magnetic Chuck and Digit MK5 Feed System, (***Machine #201***)
136.	1	P & H 1-Ton Electric Chain Hoist with Approximately 24 ft. 1-Ton Swinging Jib Rail
137.	1	Dayton 1-Ton Electric Chain Hoist with Approximately 24 ft. 1-Ton Swinging Jib Rail
138.	1	CM Loadstar 1-Ton Electric Hoist with Approximately 18 ft. 1/2-Ton Swinging Jib Rail
139.	1	Industrial Air 36" Industrial Fan
140.	1	Industrial Air 36" Industrial Fan
141.	1	36" Industrial Fan
142.	1	36" Industrial Fan
143.	1	36" Industrial Fan
144.	3	Industrial Fans
145.	3	Heavy Duty Shields
145A.	1	13 ft. 1/2-Ton I-Beam
145B.	1	20 ft. 1-Ton Swivel I-Beam
145C.	1	Liston Steel Storage Cabinet with Fold-Up Doors
146.	1	CM Loadstar 1-Ton Electric Chain Hoist with Approximately 24 ft. 1-Ton Swinging Jib Rail
147.	1	P & H Zip II 1-Ton Electric Chain Hoist with Bushman 20 ft. 1-Ton Rail
148.	1	Mattison Horizontal Spindle Reciprocating Table, S/N 20978 with 50 hp Motor, 36" W x 120" L x 32" Working Height, Magnetic Chuck, Wheel Balance, Sony Read-Out and Digit MK5 Feed System with Energy Grind Capabilities (***Machine #214***)
149.	1	Mattison Horizontal Spindle Reciprocating Table, S/N 20067 with 50 hp Motor, 12" W x 151" L x 26" Working Height, Magnetic Chuck, Sony Read-Out and Digit MK5 Feed System with Energy Grind Capabilities (***Machine #207***)
149A.	1	Havlik 12-Speed Milling Head, Model VR, S/N 5171-1 with Weinman Pump 30 hp Hydraulic Pump
149B.	1	30 hp 1750 RPM Hydraulic Pump with Reservoir
150.	1	CM Loadstar 1-Ton Electric Chain Hoist with Approximately 20 ft. 1-Ton Swinging Jib Rail
151.	1	CM Loadstar 1-Ton Electric Chain Hoist with Approximately 20 ft. 1-Ton Swinging Jib Rail
152.	1	CM Loadstar 1-Ton Electric Chain Hoist with Approximately 20 ft. 1-Ton Swinging Jib Rail
153.	1	CM Loadstar 1-Ton Electric Chain Hoist with Approximately 20 ft. 1-Ton Swinging Jib Rail
154.	1	CM Loadstar 1-Ton Electric Chain Hoist with Approximately 20 ft. 1-Ton Swinging Jib Rail
155.	1	Hill Horizontal Spindle Reciprocating Table Curve Grinder, S/N 108 with 12" W x 192" L x 18 ft. Working Height, Magnetic Chuck and Digit MK-5 Feed System (***Machine #202***)
156.	1	Rahn 30" Wide x 196" Long Grinding Surface Table, S/N 15898
157.	1	3-Ton Electric Hoist with 3-Ton Jib
158.	1	CM Loadstar 1-Ton Electric Hoist with 1-Ton Approximately 12 ft. Beam
159.	1	Cleerman Vertical Industrial Drill Press with Coolant Bed, 16" x 30" T-Slot Table, S/N 30-C-761
160.	1	Jet Pedestal Mounted 8" Double End Bench Grinder, Model JBG-8A
161.	1	Airflow Industrial Air Cleaner, Model Mini Pac BW/Shaker, S/N 458
162.	1	Dust Cat Dust Collector, Model Mini D8 6002 4038-0397
162A.	1
162B.	1	Rockford Idler Roller Set
162C.	1
162D.	1	Roll Grind Fixture with Live Centers
163.	1	DoAll Horizontal Band Saw (1136), Work Thickness - Up to 3"
164.	1	Heald Universal ID/OD Grinder, Model 174, S/N 253 with 48" Slotted Face Plate (***Machine #535***)
165.	1	P & H 1/2-Ton Electric Hoist, CM Trolley and Approximately 18 ft. 1/2-Ton Swivel Beam
166.	1	P & H 1/2-Ton Electric Hoist, CM Trolley and Approximately 16 ft. 1/2-Ton Swivel Beam
167.	1	(15) Assorted Motors and Drives - Up to 7-1/2 hp
168.	1	(3) Assorted Roller Stands
169.	1	Remington 2-Drawer Large Fire-Proof File Cabinet
169A.	1	Hogland Contour Wheel Dresser with Case
170.	1	Cincinnati Bickford Radial Drill Press, Model 11, S/N 2E728 with 4 ft. Arm (***Machine #109***)
171.	1	Tracer with Self-Contained Hydraulic Pump and Reservoir
171A.	1	Dayton Wet/Dry Shop Vac
171B.	1	Hako Wet/Dry Shop Vac
171C.	1	Minuteman Wet/Dry Shop Vac
172.	1	Neutrofier Magnetic Chuck Control, Model EML200, S/N FB2192
172A.	1	Electromatic Neutrofier Magnetic Chuck Control, Model EMLV15, S/N FK2080
173.	1	Parker Industrial Vacuum
174.	1	NSS Super Service Thoroughbred Floor Scrubber
175.	2	Portable Radiant Heaters
176.	2	Portable Radiant Heaters
177.	1	Harvard Portable Fluid Guard System, Model 87D
178.	1	Electrolmatic Neutrol Portable Magnetic Chuck Control
179.	1	Signode Strapper, Model DF-10-RW with Hand Tools including Signode Tensioner and (2) Sealers
180.	1	Signode Strapper with Tensioner
181.	1	Signode Strapper with Tensioner
182.	1	Signode Strapper with Tensioner
183.	1	Signode Strapper with Tensioner
184.	1	. . . .
185.	3	Barrel Carts
185A.	1	2-Ton Overhead Crane with Assorted Parts
185B.	1	Assorted Machinery Levelers
186.	1	Unisys Monitor Input Regulator
187.	1	Assorted Machinist Stands, Collet Holders and Tap Holder Inserts
188.	1	4" Machinist Vise
189.	1	. . . .
190.	1	Hold-Down Clamps, T-Slots, Rockland FFT Analyzer, Model 5840A and Carbide Inserts
191.	1	Assorted Hardware including Nuts, Bolts, Screws, Socket Head Cap Screws, Etc.
192.	1	Tool Holders, Centering Holes, Positioners, Location Stands, Gauge Blocks, Angle Plate, T-Slot Studs, Etc.
193.	1	Assorted Eye Bolts
194.	1	(140) Assorted Cutters
195.	1	Large Assortment Carbide Tooling including Carbide Insert Cutters, Drills, Face Mills, End Mills
196.	5	Tables including Horses
197.	26	Assorted C-Clamps - Up to 12"
198.	1	Assorted Cleaning and Maintenance Supplies, Paints, Wrenches, Etc.
199.	3	Tables
200.	1	(6) Boxes Sanding Paper, Sander/Grinder, Wheels
201.	1	(20) Boxes Sightsavers and Lens Cleaning Supplies, Etc.
202.	1	. . . .
203.	1	. . . .
204.	1	Penna Industrial Furnace 288" L x 48" W x 24" High, 1950 Degree F Max. Temp (***#2***)
205.	1	Penna Industrial Furnace 235" Long x 48" W x 24" H (***#3***)
206.	1	Penna Industrial Furnace 235" Long x 48" W x 24" H (***#4***)
207.	1	Lindberg 1,000 Degree F Electric Furnace, S/N 13407, 60" L x 18" W x 18" H (***#6***)
208.	1	Lindberg Electric Pit Type Furnace, S/N 6456, 24" Diameter x 24" Depth, 52 KW Endothermic, 1250 Degree F Max. Temp.
208A.	1	Large Assortment Furnace Heat Treatment Tooling
209.	1	Heat Treat Water Quench Cooling Tank, 20' L x 3' W x 3' D
210.	1	3 hp Agitator
211.	1	1-1/2 hp Agitator
212.	1	1/2 hp Oil Pump
213.	1	L-Shaped Heat Treat Oil Quench Cooling Tank
214.	1	1-1/2 hp Agitator
215.
216.	1	(21) Assorted Set-Up Fixtures
217.	1	. . . .
218.	1	. . . .
219.	1	. ************************* SALE CONTINUES WITH MILLING & DRILLING TOOLS *************************
220.	1	Large Assortment High Speed Drill Bits
221.	1	Large Assortment High Speed Tool Holders for Slab Mills
222.	1	Large Assortment Pilot Holders
223.	1	Large Assortment Reamers, Carbide Inserted Cutters
224.	1	X-Large Assorted High Speed Drill Bits, Wood Roof, Face Mills, End Mills, Taps
225.	1	X-Large Assorted High Speed Drill Bits, Wood Roof, Face Mills, End Mills, Taps
226.	1	Large Assortment Reamers
227.	1	Taps, Face Mills, Solid Carbide End Mills
228.	1	High Speed Face Mills, Milling and Drilling Tools
229.	1	High Speed Face Mills, Milling and Drilling Tools
230.	2	New Darex Diamond 118 Degree Grinding Discs, Model 800-547-0222
231.	1	8" Abrasive Cut-Off Saw, 3 hp
232.	1	High Speed Milling and Drilling Tools including Face Mills, End Mills, Etc.
233.	1	X-Large Assortment Milling and Drilling Tools with Portable Cart
234.	1	. . . .
235.	9	Tables
236.	1	. . . .
237.	1	(2) 5 ft. Long Magnetic Chuck Set with Electro-Matic Rectifier Power Supply, Model 4D50-2421, S/N FF5057, 230/460 V, 3 Phase
238.	1	Assorted Nylon Lifting Straps
239.	1	Assorted Heat Treatment Tooling
240.	2	Sheet Metal Racks
241.	1	Assorted Lifting Beams, Plate Lifters, Etc.
242.	1	Large Assortment Lifting Chains
243.	1	Large Assortment Lifting Chains
244.	1	(5) Sections Steel Shelving
245.	1	22 ft. 2-Ton Jib Crane (***No Hoist***)
246.	1	. . . .
247.	1	. . . .
248.	1	. . . .
249.	1	. . . .
250.	1	. ************************* THANK YOU FOR ATTENDING TODAY'S AUCTION SALE! *************************



---

 

(800) 775-2289 (USA & Canada) - (412) 765-1170 - Fax (412) 765-0910

E-Mail sales@harrydavis.com

Revised 10/03/2003 - Copyright © 2003 Harry Davis & Company, L.P.