hdc-logo1.gif (2954 bytes)

Auctioneers & Appraisers
(800) 775-2289, (412) 765-1170, Fax (412) 765-0910
1725 Boulevard of the Allies, Pittsburgh, PA 15219 USA

- - AUCTION CATALOG - -

Rainbow Glacier
1700 West 20th St., Vancouver, WA 98660 (near Portland, OR)
February 21, 2008 at 9:30 a.m.

E-Mail: sales@harrydavis.com | HOME | Bidspotter ONLINE BIDDING | PDF of 6-Page Mailer | Auction CATALOG

 

WHO:
RAINBOW GLACIER - Ice Cream Novelty Plant

WHAT:
A Harry Davis & Company Auction Sale of Ice Cream Novelty Manufacturing and Packaging Equipment

WHEN:
THURSDAY, FEBRUARY 21, 2008 at 9:30 a.m.

WHERE:
1700 West 20th St., Vancouver, WA (12 miles from Portland, Oregon airport)
View Google Map  

DIRECTIONS: From Portland airport, I-205 North 2.5 mi. to Exit 27 to WA-14 west toward Vancouver, 6 mi. to City Center to C Street to left on Rt. 501 west 1.5 miles to right at West 20th St. to sale site. Watch for Arrows!

INSPECTION:
February 20 or by appointmrnt.
Call 800-775-2289 for details

TERMS:
A 10% BUYER’S PREMIUM APPLIES TO ALL SALES.
Full payment day of sale in guaranteed or certified U.S FUNDS. Company check accepted with letter of approval from your bank. Direct wire transfers to the account of Harry Davis & Company accepted ONLY with prior arrangement. You are urged to inspect before the sale.  Removal of items by insured riggers only. Although information has been obtained from reliable sources, the Auctioneer makes no warranty or guarantee, express or implied as to the the accuracy of information in this brochure. Additional terms to be announced at sale. Click here for additional terms of sale. Absentee bidding also available, click here for details. (*Online bidding: 13% Buyers Premium.) Martin I Davis PA Auctioneer AU1458-L; Stanford G Davis PA Auctioneer AU3301-L. Martin I. Davis WA Auctioner #2469.

atlan035.jpg (13805 bytes)

ONLINE BIDDING will be available through Bidspotter.

DOWNLOADS:  Absentee Bidding Form | Bank Letter of Approval | Wire Transfer Form | Bidspotter ONLINE BIDDING | Auction CATALOG

 

SEARCH THE LIST: Specific items or words can be located by pressing Ctrl + F

Item  Qty. Description
1. 1 New Baldor 5 hp Motor, 1750 RPM, 208 - 230/460 V, 3 Phase, Type CM3615T
2. 1 New Baldor 3 hp Motor, 1725 RPM, 208 - 230/460 V, 3 Phase, Type JMM3554T
3. 3 New Baldor and Dayton 1/2 and 3/4 hp Motors, 230/460 V, 3 Phase
4. 1 Assorted New Square D Electrical including: Safety Switches, Thermal Overload Relays, Etc.
5. 64 Pcs. 1" to 2-1/2" New and Used S/S Fittings including New Weld Type Elbows, T's, Reducers, Ferrules, Clamps, Also including Clamp Type Elbows, T's and Reducers
6. 2 1-1/2" Clamp Type S/S Plug Valves
7. 3 1-1/2" and 2" Clamp Type and Weld Type S/S Plug Valves
8. 4 1-1/2" Clamp Type S/S Butterfly Valves
9. 3 2" Clamp Type S/S Butterfly Valves
10. 2 2" Clamp Type S/S Butterfly Valves
11. 3 2" Clamp Type S/S Butterfly Valves
12. 35 Tri-Clover Type 2" S/S Clamps
13. 20 2" S/S Clamps
14. 38 1-1/2" Tri-Clover Type S/S Clamps
15. 38 1-1/2" S/S Clamps
16. 38 1-1/2" S/S Clamps
17. 27 2" to 4" S/S Clamps
18. 1 Tri-Clover 2" 2-Way S/S Air Valves, Clamp Type
19. 1 Tri-Clover 2" 2-Way S/S Air Valves, Clamp Type
20. 2 APC 1-1/2" and 2" 2-Way S/S Air Valves, Clamp and Threaded Type
21. 2 Cherry Burrell 2" 2-Way S/S Air Valves, Clamp Type
22. 2 Cherry Burrell 2" 2-Way S/S Air Valves in Manifold
23. 1 (2) Tri-Clover 3" S/S Air Valves, (1) Missing Bottom Assembly
24. 1 Tri-Clover 2" Flo-Diversion Valve, Model 262-121, S/N 13812
24A. 1 ID Xpert Hand Held Labeller with Cartridges and Case
25. 1 Mettler Toledo 150 lb. Digital Platform Scale, Model Wildcat, S/N 00564906FD with 14" x 12" S/S Platform
26. 1 Tri-Clover 1.5 hp Centrifugal Pump, Type C114, Complete with 1720 RPM Motor with All S/S Body and 2" x 1-1/2" Clamp Type S/S Head
27. 1 Tri-Clover 2 hp Centrifugal Pump, Type C216, Complete with 1750 RPM Motor with All S/S Body, 2-1/2" x 1-1/2" Clamp Type S/S Head
28. 1 Tri-Clover 3 hp Centrifugal Pump, Type C218, Complete with 1725 RPM Motor, 1-1/2" x 1-1/2" Clamp Type S/S Head
29. 1 Tri-Clover 15 hp Centrifugal Pump, Type C218, Complete with 3515 RPM Motor, 3" x 1-1/2" Clamp Type S/S Head
30. 1 APV Approximately 5 hp Centrifugal Pump, Model 16V with 2" x 1-1/2" Threaded Type S/S Head
31. 45 48" x 40" Wood Pallets
32. 1 .........................
33. 1 .........................
34. 1 ......................... ************************* SALE CONTINUES IN PRODUCTION ROOM *************************
35. 1 ************************* BULK BID OF LINE #1 - 8-WIDE VITALINE INCLUDING MOLD SET, STICK FEEDER AND WRAPPER *************************
36. 1 Line 1: 8-Wide Vitaline - Complete with All S/S Frame, (2) Flavor Feed Hoppers with Pumps, Controls and Brine Chiller (*Located in Engine Room*)
37. 1 Complete Set of Astro Style Rocket Pop 8-Wide Vitaline Mold Set
38. 1 Stormax Stick Feeder, S/N 0023-0231
39. 1 Fuji Wrapper, Model FW-370 - Complete with Baldor VFD Controller
40. 1 .........................
41. 1 ************************* BULK BID LINE 3 - 8-WIDE VITALINE INCLUDING MOLD SET, STICK FEEDER AND WRAPPER *************************
42. 1 Line 3: 8-Wide Vitaline - Complete with All S/S Frame, with Pumps, Controls and Brine Chiller (*Located in Engine Room*)
43. 1 Complete Set of 8-Wide Twin Stick Type Mold Set
44. 1 Stormax Stick Feeder, S/N 0031-0321
45. 1 Fuji Wrapper, Model FW-370 - Complete with Baldor VFD Controller
46. 1 Line 2: 8-Wide Vitaline Frame with Related Parts
47. 1 Fuji Wrapper, Model FW3700-11, S/N 031204
48. 373 3 oz. Ice Cream Type 8-Wide Mold Set
49. 407 3 oz. Ice Cream Type 8-Wide Mold Set
50. 661 Twin Stick 8-Wide Mold Set
51. 380 Single Stick 8-Wide Mold Set
52. 366 Single Stick 8-Wide Mold Set
52A. 237 Astro Pop or Rocket Pop Type 8-Wide Mold Set
53. 1 ************************* BULK BID LINE #4 - 6-WIDE VITALINE INCLUDING MOLD SET, STICK FEEDER AND WRAPPER *************************
54. 1 Line 4: 6-Wide Vitaline Complete with All S/S Frame, (2) Flavor Feed Hoppers with Pumps, Controls and Brine Chiller (*Located in Engine Room*)
55. 1 Complete Set of 6-Wide Astro / Rocket Type Mold Set
56. 1 Stormax Stick Feeder, S/N 0023-0231
57. 1 Fuji Wrapper, Model FW370 - Complete with Baldor VFD Controller
58. 664 Twin Stick 6-Wide Mold Set
59. 378 Junior 6-Wide Mold Set
60. 309 Astro Pop or Rocket Pop 6-Wide Mold Set
61. 351 Single Stick 6-Wide Mold Set
62. 375 Single Stick 6-Wide Mold Set
63. 496 3 oz. Ice Cream Type 6-Wide Mold Set
63A. 170 3 oz. Ice Cream Type 6-Wide Mold Set
63B. 374 3 oz. Ice Cream Type 6-Wide Mold Set
63C. 379 Junior 6-Wide Mold Set
64. 1 .........................
65. 1 17 ft. L L-Shaped S/S Product Conveyor - Complete with 12" W Plastic Chain with Drive
66. 1 11 ft. L L-Shaped S/S Product Conveyor - Complete with 12" W Plastic Chain with Drive
67. 1 12 ft. L S/S Product Conveyor - Complete with 12" W Plastic Chain with Drive
68. 1 24 ft. L S/S Product Conveyor - Complete with 12" W Plastic Chain with Drive
69. 1 Large Assortment of Fuji Wrapper Parts including Chain, Belts, Bearings and Spare Shafts
70. 1 .........................
71. 1 Cherry Burrell 2-Barrel Ice Cream Freezer, Model V-603, S/N 4907 - Complete with Newer Style Pumps, Controls with VFD's
72. 1 C.E. Howard 4-Compartment Jacketed S/S Flavor Tank, Dia. 56" W x 39" W x 58" D with Agitators and Sprayballs
73. 1 12' L x 16" W x 32" H S/S Walk Platform with Stairs and Handrails
74. 1 4-Compartment Insulated S/S Flavor Tank, Dia. 47" W x 43" W x 38" D with Agitators and Sprayballs
75. 1 15'8" L x 18" W x 28" H S/S Walk Platform with Stairs and Handrail
76. 1 Creamery Package 2 hp Centrifugal Pump with 3450 RPM, 1-1/2" x 1-1/2" Clamp Type Head
76A. 1 Creamery Package 2 hp Centrifugal Pump with 3450 RPM, 1-1/2" x 1-1/2" Clamp Type Head
77. 1 Tri-Clover Approximately 1 hp Centrifugal Pump with 1-1/2" x 1-1/2" Clamp Type Head
78. 1 1/2 hp Centrifugal Pump with 1.5 x 1.5" Threaded and Clamp Type Head
79. 1 Creamery Package 1/2 hp Centrifugal Pump with 1-1/2" Clamp Type S/S Head
80. 1 1/2 hp Centrifugal Pump with 1.5" Clamp Type Head
81. 1 Cherry Burrell 1,000 Gal. Dome-Top S/S Mix Tank with Agitators and Sprayballs
82. 1 500 Gal. Hinged Lid S/S Mix Tank with Agitator, Sprayballs and Valves
83. 1 Tri-Clover 5 hp Centrifugal Pump with 1750 RPM Motor, 2" x 1-1/2" Clamp Type S/S Head
84. 1 Schlumberger 2" Flow Meter, Model 831, S/N 0242CP
85. 1 Neptune 2" Flow Meter, Model 831, S/N 078001
86. 1 Valco 300 Gal. Jacketed S/S Farm Tank with Agitator and Sprayball
87. 1 Valco 300 Gal. Jacketed S/S Farm Tank with Agitator and Sprayball
88. 1 Tri-Clover 1/2 hp Centrifugal Pump with 1-1/2" Clamp Type S/S Head
89. 1 Tri-Clover 1/2 hp Centrifugal Pump with 1-1/2" Clamp Type S/S Head
90. 1 Mueller Skid-Mounted CIP System - Complete with 300 Gal. 100 and 60 Gal. S/S Tanks, Complete with Fristam 5 hp Centrifugal Pump, Valves, Shell and Tube Heat Exchanger and Controls
91. 1 77" L x 21" W Jet Spray S/S Wash Trough with APV Pump
92. 1 Cherry Burrell 2-Compartment at 250 Gal. S/S Insulated Flavor Tank, Model ST, S/N 250-69 - 486 with Agitators and Sprayballs
93. 1 10'8" L x 18-1/2" W x 24" H L-Shaped S/S Walk Platform with Stairs and Handrail
94. 1 Tri-Clover 5 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head
95. 1 APV S/S Plate Press, Model SR35-S, S/N 14722 with (2) Dividers
96. 1 Approximately 30 Gal. S/S Tank with Agitator and Valve
97. 1 4' L All S/S Shell and Tube Heat Exchanger
98. 1 Neptune 2" Flow Meter, Model 832, S/N 5313EV
99. 1 Strahman M-5000 Hose Mixing Station with Hose and Nozzle
99A. 1 Strahman M-5000 Hose Mixing Station with Hose and Nozzle
100. 2 Waukesha / Cherry Burrell 1-1/2" 3-Way Long Stem S/S Air Valves, Clamp Type
101. 2 Waukesha / Cherry Burrell 1-1/2" 3-Way Long Stem S/S Air Valves, Clamp Type
102. 1 Approximately 630 ft. 1-1/2" Installed S/S Piping Throughout Production Room including (35) 1-1/2" and 2" S/S Butterfly Valves, Clamps with Hangers and (2) Floverter Stations (**Note: Includes All Valves Above and Below Tanks**)
103. 7 Pcs. Assorted S/S Stands and Tables including S/S Cabinet with Sink
104. 1 2006 - 80 ft. L x 49 ft. W Interior Installed Modular Production Building - Complete with Removable Roof and Panel Sections including (2) Bumper Production Doors, (2) Knock-Out Access Panels with Lighting (**Ceiling Supported By Main Building**)
105. 1 .........................
106. 1 (4) Pcs. Aluminum Ladders including (2) Cotterman 5' and (2) Werner 3'
107. 1 Assorted S/S Baskets, Sifters, Aluminum Line Wrenches, (2) S/S Milk Cans with (3) S/S Tables
108. 1 Assorted Rubber Mats, Brushes, Safety Cones, Lube Supplies, Garbage Cans including 3-Sections Steel Pallet Racking
109. 1 Guardian Emergency Eyewash/Shower Station
110. 1 ......................... ************************* SALE CONTINUES IN PACKAGING ROOM *************************
111. 1 Hayes Boxer, Model 518AF30R, S/N 8650 - C001122 - Complete with S/S Body, Nordson Gluer with Controls and Spare Parts
112. 1 Goring Kerr All S/S Metal Detector, S/N 22618 - Complete with 18" W x 8-3/4" H Opening Mounted on 93" L Power Conveyor System including 44" L Incline
113. 1 Fleet Line Portable Tape Sealer, S/N 1281
114. 1 15' L S/S Power Conveyor System with 12" W Plastic Chain with Drive
115. 1 18' L - (2) Pcs. Roller Conveyor Sections, 13" W
116. 1 Best Pack Portable Tape Sealer, Model 3ALR-50, S/N 973156 with (2) Roller Conveyor Sections
117. 1 Adjustable Tape Sealer
118. 1 Approximately 600 Gal. Vertical Glycol Resin Holding Tank with Circulating Pump
119. 1 .........................
120. 1 ......................... ************************* SALE CONTINUES IN ENGINE ROOM *************************
121. 1 Frick 100 hp Screw Ammonia Compressor, Model RWB11, S/N S0480KFM FLHAA3 with Touch Pad Controls and Ram Starter (Low Side Booster)
122. 1 Frick 125 hp Screw Ammonia Compressor, Model RXB50, S/N S0095KFM CTHAA3 with Touch Pad Controls and Ram Starter (**NOTE: New Screw Installed in 2005 including Microprocessor) (High Side Booster)
123. 1 Frick 125/100 hp Screw Ammonia Compressor, Model RXF50, S/N S0194NF MNTHAA3 with Touch Pad Controls, Ram Starter (Low Side Booster)
124. 1 Frick 300 hp Screww Ammonia Compressor, Model RWB11134, S/N S0115EFMC WJAA3 with Touch Pad Display (R-22 Application)
125. 1 Assorted Frick and Other Refrigerated Spare Parts including Danfoss Valves, Other Valves, Gaskets, Johnson Controls, Etc.
126. 1 Mycom 6-Cylinder 40 hp Ammonia Compressor, Model M6WA, S/N 612011 wiht Allen Bradley Starter
127. 1 Carrier 8-Cylinder 50 hp Ammonia Compressor, Model 5H81 - 349, S/N 630003 with Starter
128. 1 W.E. Stone Ammonia Intercooler with Suction Accumulator including Valves and Controls
129. 1 ......................... ************************* THE NEXT (2) LOTS ARE LOCATED ON ROOF AND WILL BE SOLD AT THIS TIME *************************
130. 1 Evapco Evaporative Condenser, Model LSCA120, S/N 958102W
131. 1 Evapco Evaporative Condenser, Model LSCA135, S/N 915707
132. 1 .........................
133. 1 McCulloch and Sons 18' L x 36" W Horizontal Ammonia Receiver
134. 1 Hansen Auto Purger
135. 1 9' L x 4' W Ammonia Surge Tank with Valves and Support
136. 1 Park Int. 5' H x 24" W Water Ionizer, Type RT-2471-4 with 5' H x 22" W Water Softener with Rack
137. 1 (2) Iwaki Chemical Feed Pumps with Lakewood Instrument, Model 140 Controller
138. 1 1999 Fulton 50 hp Vertical Boiler System, Model ICS-50, S/N 83949, 150 psi Rated at 1725 lbs. of Steam Per Hour with Controls
139. 1 3' x 3' x 48" H Square Resin Caustic Tank with Agitator including Tank Stand
140. 1 1,000 Gal. S/S Horizontal Tank
141. 1 Several Bags of 50 lb. Bags Calcium Chloride
142. 1 Uninstalled Water Softening System Components
143. 1 New Pair Production Bumper Doors, Size 47" W x 9' H Each Door
144. 1 .........................
145. 1 ......................... ************************* SALE CONTINUES UPSTAIRS *************************
146. 1 Van Air Refrigerated Air Dryer, Model VR-100, S/N 96A1V-3210-2P
147. 1 Arrow Pneumatics Refrigerated Air Dryer, Model A-100-2, S/N QA110
148. 1 General Pneumatics Refrigerated Air Dryer, Model TL100, S/N 98IHX1293
149. 1 10' L x 24" W Horizontal Air Receiver
150. 1 Large Assortment 1" to 6" Plastic PVC, Sch. 80 Piping Up to 20' L Section
151. 1 (21) Pcs. 2006 Installed Electric Control Panels including: (13) Square D 30 to 100 Amp Safety Switches, (8) Telemecanique Relay Panels with Starter Panel and Solenoid Control Panel (*All Located Above Modular Building)
152. 1 NSF Water Softening System - Complete with 4' L x 12" W Filters with Tank and Filters
153. 1 30" L x 6" W S/S Inline Filter
154. 1 .........................
155. 1 ......................... ************************* SALE CONTINUES DOWNSTAIRS *************************
156. 1 (2) Scott Air Packs including Other Assorted Gas Masks with Cartridges
157. 1 Assorted Chemical Protective Garments including (6) Jump Suits with Rubber Boots with Safety Tape
158. 1 Lan Wrapper Pallet Wrapper, E Series, S/N 0702
159. 3 30" and 42" Assorted Portable Fans
160. 1 .........................
160A. 1 55 Gal. Drum Chevron Ammonia Compressor Oil (**NOTE: CHEMICAL DISCLOSURE**)
161. 1 4' W x 30" W x 24" D Portable S/S Rectangular Tank
162. 1 Assorted Sized Pipe Insulation
163. 1 ......................... ************************* SALE CONTINUES IN SUGAR SYSTEM AREA *************************
164. 1 Approximately 5,000 Gal. Vertical S/S Liquid Sugar Tank - Complete with UV System and Side Access Door
165. 1 Approximately 5,000 Gal. Vertical Epoxy Lined Liquid Sugar Tank - Complete with UV System and Side Access Door
166. 1 Late Model Roper 5 hp Liquid Sugar Transfer Pump, Type 3, S/N G-52360 - Complete with 3" Head, 1725 RPM Motor with S/S Frame with Valves and Fittings including 2" S/S Line (*Ending on Top of Modular Production Building*)
167. 1 66" L x 5' W Steel Dock Ramp
167A. 1 (27) Rolls of 38 x 60 x 1.5 ml Black Poly Bags with (25) Rolls of Shrink Wrap, Roll 40 lb. Paper, (9) Boxes of 4 x 6 Thermal Transfer Labels with (9) Boxes of Carton Tape
168. 1 (2) Pcs. 9 and 10 ft. Section of Roller Conveyor - 10" and 18" W
169. 1 .........................
170. 1 ......................... ************************* SALE CONTINUES IN COOLER *************************
171. 1 (3) Pallets Assorted 6-Wide Vitaline Parts including Hopper Assembly
172. 1 Pacemaker Packaging S/S Bagger, S/N 9068
173. 1 Pacemaker Packaging S/S Bagger, S/N 9067
174. 1 Pacemaker Packaging S/S Bagger
175. 3 S/S Baggers
176. 1 (2) S/S Bagger Parts Machines
177. 1 Pallet Assorted Bearings including Fafnir, Timken, SKF including Pillow Cushion Bearings and Seals
178. 1 (2) Pallets Assorted Fuji Wrapper Parts including Drive Parts, Shafts, V Belts, Etc.
179. 1 Kwik Lock Portable Bagger, Type 865A, Model AKM57NRPR, S/N 57354-1998
180. 1 Kwik Lock Portable Bagger, Type 865A, Model AKM57NRPR, S/N 52323-1996
181. 6 Cases Striplok Bag Closures
182. 1 Pallet Assorted Kwik Lock Bagger Parts
183. 1 Willet Model 460si Ink Jet Coder, S/N 014501 018950 including (2) Cases Ink and Rubbermaid Cart
184. 1 Willet Model 430 Ink Jet Coder, S/N 993801 1501 03
185. 1 Pallet Assorted Little David and Willett Ink Jet Coder Parts
186. 1 (3) Pallets 6 and 8-Wide Basket Stick Machine Parts
187. 1 Pallet Assorted Stormax Stick Feeder Parts
188. 1 Large Assortment 6-Wide Vitaline Parts including Main Sprocket Assembly, Chain, Covers and Spray Heads
189. 1 (4) Pallets Assorted 6 and 8-Wide Vitaline Parts including Air Cylinders, Shafts, Etc.
190. 1 Pallet of Assorted Pneumatic Fittings including Regulators with Air Hose
191. 1 Pallet Assorted 6-Wide Vitaline Parts including Flavor Feed Manifold Parts, Assemblies, Etc.
192. 1 (2) Pallets Assorted 8-Wide Vitaline Extraction Parts including Feed Hoppers, Fill Heads with Main Top Assembly
193. 1 Pallet Assorted 6-Wide Vitaline Flavor Feed Tanks For 6 Flavor Configuration
194. 1 Pallet 6-Wide Vitaline Flavor Feed Parts including Hoppers, Manifold, Etc.
195. 1 Pallet 8-Wide Vitaline Flavor Feed Tanks for 6 Flavor Configuration
196. 1 (3) Pallets Assorted 8-Wide Vitaline Parts including Flavor Feed Hoppers, Manifolds, Fill Heads, Main Assembly
197. 2 Rolls New Diamond S/S Vitaline Chain, Part #1310214 - D-360 and 1310213 - 360 (Paid Approximately $6,000.)
198. 1 Pallet (3) Assorted S/S Flavor Feed Hoppers
199. 1 .........................
200. 1 Modular Cooler, with Freon Refrigeration Compressor System & Blowers
201. 1 .........................
202. 1 .........................
203. 1 .........................
204. 1 ......................... ************************* SALE CONTINUES OUTSIDE TO AC AND PACKAGING CHILLER AREA *************************
205. 1 Gardner Denver 100 hp Screw Air Compressor, Model WD203 ECM544, S/N M18071
206. 1 Atlas Copco 20 hp Air Compressor, Model GA-15, S/N ARP771477
207. 1 Atlas Copco 20 hp Air Compressor, Model GA-15, S/N ARP768277
208. 1 York Millennium Packaged Chiller, Model YCW228 HD0 - 46PA, S/N UHJMQ00882, R-22 Refrigerant with Controls
208A. 1 Spare York Chiller Compressor Head
209. 1 BAC Perma Cold Evaporative Condenser, Model FXT-87, S/N U013895 9001MAD with Valves, Pumps and Piping
210. 1 .........................
211. 1 .........................
212. 1 ......................... ************************* SALE CONTINUES IN YARD *************************
213. 1 8' L x 3' W Resin Holding Tank with Lid
214. 1 1998 Evapco Evaporative Condenser, Model PMCB 390, S/N 988297W
215. 1 Air Compressor with Horizontal Tank
216. 2 Vitaline Steel I-Beam Skids, Approximately 34' L
217. 1 Large Assortment Wooden Pallets - Approximately 400
218. 1 APV SR310 S/S Plate Press Frame Parts with Screw
219. 1 (2) Vitaline S/S Frames
220. 1 Rehrig Howard 300 Gal. Hinged Lid S/S Tank, S/N 128
221. 1 Letsch Approximately 200 Gal. Dome-Top S/S Mix Tank, S/N 5881-3 with Side Sweep Agitator (*NOTE: No Lid)
222. 1 Approximately 150 Gal. S/S Farm Tank (*NOTE: Missing (1) Leg and (1) Lid)
223. 1 (2) Steel Brine Chillers, 21' L x 30" W with (1) 20' Rail Beam
224. 1 (4) Pcs. S/S Vitaline Frames
225. 1 Portable S/S COP Tank with Controls
226. 1 Assorted Pumps, Drives, Motors with Portable Resin Tote
227. 1 Cherry Burrell Fruit Feeder, Model FFH-4, S/N 2012
228. 1 Assortment Clark Electric Pallet Jack, 100 hp Motor with Mastercraft Boxer Frame
229. 1 .........................
230. 1 .........................
231. 1 Assortment Steel Stock, S/S Covers, Stairs, Large Assortment S/S Pipe with Connectors, Sink and Electric Pallet Jack
232. 1 Approximately 300 Gal. S/S Tank Mounted on Skid
233. 1 Approximately 130 Wood Pallets - Most 48" x 40"
234. 1 .........................
235. 1 .........................
236. 1 .........................
237. 1 ......................... ************************* SALE CONTINUES IN MAINTENANCE AREA *************************
238. 1 Milwaukee Portable Band Saw, Cat #6236 with Case and Blades
239. 1 Milwaukee 14" Chop Saw
240. 1 (3) Pcs. Power Tools including Bosch and Skilsaw Circular Saw with Black and Decker Jig Saw
241. 1 Double Pedestal Grinder
242. 1 (3) Pcs. Power Tools including Milwaukee 1/2" Drill, Die and Angle Grinders
243. 1 (3) Pcs. Electric Testers including Fluke 33 Tru RMS Clamp on Voltage Meter, UEI DM383 Multi Tester with Electro-Therm Multi Probe Temperature Tester
244. 1 Milwaukee Electric Sawzall with Case
245. 1 Milwaukee Falcon 3/4" Rotary Hammer Drill with Case
246. 1 8' x 4' Steel Workbench with Wood Top and Vise
247. 1 (2) Pallets Assorted Oil Dry, Lubes, Paints, Caulking Guns including Portable Paint Marker
248. 1 .........................
249. 1 Contents Bench including: Large Assortment Tooling with Rigging Tools including Machine Movers with Slings, Jack, Safety Harnesses, Levels, Crow Bars, Tap and Die Sets, Rivet Gun, Electric Wire Feeders, Knock Out Punch Set, C-Clamps, Freon, Gauge Set, Etc.
250. 1 12' L x 6' W Steel Workbench - Complete with (2) Vises and Lighting
251. 1 (2) Ryobi and Dayton Porable Shop Vacs
252. 1 (2) Pcs. Delta Pedestal Drill with Vise and Pro-Tech 6" Double End Grinder on Pedestal
253. 1 Assorted Vitaline S/S Track Assembly with Legs
254. 1 Hydraulic Press with 20-Ton Jack
255. 1 (4) 2-Door Steel Cabinets
256. 1 38" x 29" Pure Wash Parts Washer
257. 1 Remaining Contents of Room including: 14-Sections of Steel Shelving, Assorted Hardware with Bins and V-Belts, Cabinets
258. 1 Jet 10" Double End Grinder
259. 1 K 6' Lathe with 3-Jaw Chuck, Spare Chuck, Etc.
260. 1 2-Ton Portable Crane
261. 1 (2) Pcs. Ridgid K-3800 Portable Sewer Cleaner with Floor Buffer
262. 1 Speedaire 120 lb. Portable Sandblaster
263. 1 Hypertherm Max. 48 Portable Plasma Cutter
264. 1 Lincoln SP-170T Portable Welder with Leads and Argon Tank
265. 1 Portable Burning Cart with Gauges, Hose and Tanks
266. 1 Miller Syncrowave 250 Portable Welder with Torch, Leads and Argon Tank
267. 1 Assortment of Welding Wire
267A. 1 Spare Argon Tank
268. 1 Ridgid 400 Pipe Threader
269. 1 Ridgid Pipe Vise
270. 1 Ridgid Pipe Vise
271. 1 Assorted Ridgid Pipe Tools including Pipe Threader with Dies and Pipe Wrenches with Steel Workbench and Vise
272. 1 Assorted Propane Heater with Portable Lighting
273. 1 CM 1-Ton Electric Chain Hoist
274. 1 Portable Sump Pump with Hose
275. 1 (7) Sections Standard Pallet Racking, 4-high, with 25' (approx.) Uprights
276. 1 Werner 21 ft. Fiberglass Extension Ladder
277. 3 Werner 6 and 8 ft. Fiberglass A-Frame Ladders
278. 1 Pallet Atlas Copco Air Compressor Parts
279. 1 Pallet Assorted Hardware including Nuts, Bolts, Washers, Screws, Cotter Pins, O-Rings, Etc. with Bins
280. 1 (4) Pallets Assorted Motors, Drives and Pumps with S/S Conveyor Frame
281. 1 (6) Pallets Plumbing Supplies including Sizes 1/2" to 2" with Elbows, Reducers, Unions, Nipples, Also with PVC Fittings Up to 4" and Sinks
282. 1 Pallet Assorted Tri-Clover, Creamery Package Centrifugal Pump Parts including Backplates, Covers, Shafts, Springs, Etc. with Steam Valves
283. 1 Pallet Electric Extension Cords
284. 1 (3) Pallets Assorted Air Hose, Transfer Hose
285. 1 New Sticks 1-1/2" to 2" S/S Piping Also including Brackets
286. 1 (3) Pallets Assorted S/S Fittings including Air Valve and Butterfly Valves and Plug Valves, S/S Fittings, Etc.
287. 1 (2) Pallets including S/S Control Panel with (2) VFD's, Other Pallet with (2) Anderson Chart Recorders, (2) Eaton VFD's, Timers, Etc.
288. 1 Portable S/S Foamer
289. 1 (3) Control Panels - (1) with Siemens Simatic S7-200 PLC with Display, Other with GE Fanuc PLC and S/S Solenoid Control Panel
290. 1 (4) Pallets Assorted Electrical including Square D Breakers, Small Transformer, Fuse Supplies, Electric Connectors, Boxes, Conduit Fittings with Wire Supplies
291. 1 Clark 4,150 lb. Propane Forklift, Model GC25MV, S/N C138MB-0344-6961KOF, with 3-stage 188" Mast, Solid Tires
292. 1 .........................
293. 1 3 hp Liquid Sugar Transfer Pump
294. 1 Pallet with Large Assortment S/S APV Press Plates with Gaskets
295. 1 Engleman Hydraulic Pallet Jack
296. 1 Crown Hydraulic Pallet Jack
297. 1 Cherry Burrell V-603 Ice Cream Freezer Frame with Parts including Barrel Assemblies, Dashers, Mutators, Pump, Motors
297A. 1 Remanufactured Cherry Burrell V603 Ice Cream Freezer Barrel Assembly
298. 1 Yale 12-Volt Electric Pallet Jack
299. 1 Clark 12-Volt Electric Pallet Jack, Model UP40, S/N WP40 - 0279-PM8023
300. 1 (2) 12-Volt Chargers
301. 1 Hyster 4,000 lb. 12-Volt Electric Pallet Jack, Model W402, S/N B218N07 337C
302. 1 Minuteman 200 x 24 V Floor Scrubber, Model MC20000 QP, S/N VMC20000 QP0910 with Charger
303. 5 Rubbermaid Resin Carts
304. 1 (2) Cabints with Contents including Rags, Paper Towels, Soap Dispensers, Hair Nets, Packages of Cloth Gloves, Rubber Gloves
305. 1 Zebra Label Printer, Model 105SL including Computer System with Software, Spare Parts Label Machine with Tables
306. 1 Precision Scientific Lab Incubator
307. 1 (4) Bug Zappers
308. 1 .........................
309. 1 ......................... ************************* SALE CONTINUES IN THE UPSTAIRS OFFICES *************************
310. 1 E-Machine T3504 Computer System - Complete with Intel Celeron D Processor 352, 100 GB Hard Drive, 256 MB DDR Ram with Canon MP160 All In One Printer
311. 1 Remaining Contents of Office includng: L-Shaped Desk, Chair, File Cabinet, Bookcase, Stool with Drafting Table
312. 1 Contents of Office including (2) Desks including L-Shaped, Steno Chairs, Table with Compaq Presario 2200 Computer System
313. 1 .........................
314. 1 ......................... ************************* SALE CONCLUDES IN DOWNSTAIRS OFFICE *************************
315. 1 Gateway Computer System, Model GT5465E - Complete with Pentium Dual Core Processor at 1.6 MHZ, 320 GB Hard Drive, Vista Operating System, 19" Flat Screen Monitor, HP Deskjet 5550 Printer
316. 1 Remaining Contents of Office including Wood Desk, Leather Like Chair, Lateral File Cabinet, (3) Side Chairs, (2) Wicker Glass Shelf Racks
317. 1 Xerox Copier, Model XC820 with Stand
318. 1 .........................
319. 1 Gateway Computer System, Model GT5465E - Complete with Pentium Dual Core Processor at 1.6 MHZ, 320 GB Hard Drive, Vista Operating System, 19" Flat Screen Monitor, HP Laser Jet JP, HP Scanner and HP 1240 Fax Machine
320. 1 Contents of Main Office Area including (3) L-Shaped Desks with Steno Chairs, (4) File Cabinets, (2) Lateral File Cabinets, Sitting Area Furniture including (6) Side Chairs with Table
321. 1 Compaq Presario Computer System - Complete with AMD Sempron 3400 Processor, 120 GB Hard Drive, 512 Memory, XPOS with HP Deskjet 5440 Printer and HP Deskjet 1120C Printer with Computer Stand
322. 1 Remaining Contents of Office - Complete with Credenza, Wood Desk, Leather Like Steno Chair, Side Chair, Octagon Table with (3) Chairs, Lateral File Cabinet, Bookcase, Daewoo TV with Stand
323. 1 (3) 4-Drawer File Cabinets with Sanyo Refrigerator, Dell and HP Computer Towers with Monitors and Folding Table
324. 1 .........................
325. 1 ......................... ************************* THANK YOU FOR ATTENDING TODAY'S AUCTION SALE! *************************

hdc-logo1.gif (2954 bytes)

(800) 775-2289 (USA & Canada) - (412) 765-1170 - Fax (412) 765-0910

E-Mail: sales@harrydavis.com

Auction Calendar  |  Absentee Bidding Form |  Bank Letter of Approval Form

Revised 02/13/2008 - Copyright © 2008 Harry Davis & Company